The OmniCube integrates photovoltaics, energy storage, direct current and flexibility. With modular design, its components, including storage battery, battery management system, energy storage inverter, energy management system and photovoltaic modules, can be customized to better cater to customers’ facilities. It stores clean energy, reduces energy costs and ensures energy sustainability for industrial and commercial applications.
Patented safety valve intelligent inspection system.
Top master control supports millisecond data acquisition.
Optional wind and solar module function.
Support seamless/second switching between on-grid and off-grid connection.
All-in-one design with factory pre-configured lightweight EMS.
Integrated optical, storage, AC and DC power distribution modules.
Multi-dimensional fire protection at the PACK and cabin level.
Real-time remote monitoring, operation and maintenance without experts on site.
Adopt the integrated design concept. Replaces the traditional "wiring harness + BMS + temperature sensor" approach. Build multi-dimensional active and passive safety protection and system-level thermal runaway risk control from the cell-level.
Voltage acquisition accuracy
(Full voltage range)
Lead time for thermal runaway confirmation
Lead time for valve opening warning
Prediction time range for thermal runaway of battery cells
DC Line
AC Line
Signal Line
Model
OmniCube-A215-100K-E
Battery type
LFP280Ah
Rated voltage
768V
Voltage range
600~876V
Rated capacity
280Ah
Rated energy
215.04kWh
Rated output power
105kW
Rated grid voltage
400V
AC connection method
Three-phase three-wire/three-phase four-wire
Grid frequency range
50Hz/60Hz
Total harmonic distortion rate of current
≤3% (Fully loaded)
Power factor
-0.99~+0.99
Max input power
50/100kW
Side max open-circuit voltage
1000V
PV side voltage range
200~850V
PV side max input current
200A
Number of MPPT circuits
1
Short-circuit current
2000A
Weight
2.6t
Dimension (W*D*H)
1750*1215*2340mm
Maximum system efficiency
89%
Configuration
MPPT, STS and PCS
Charge/discharge ratio
0.5P
Cooling method
Air cooling
Working temperature
-20 ~ +55°C
Relative humidity
0%-95%，RH
Altitude
≤2000m
Fire Control
Domestic: PACK+aerosol; Overseas: aerosol
Protection class
IP54
Cycle life
≥6000@25°C 0.5C/0.5C,90%DOD, 70%EOL
Communication interface
Domestic optional 4G; RS485, Ethernet
Protocol
Modbus, 61850
Certifications
GB36276, GB/T34131, IEC/EN62619, IEC/UL60730, IEC/EN62477, IEC/EN61000, UN38.3, UN3480
Phone number
+39 0376 278324
+39 351 380 5110
info@delmaenergy.com
Registered office
Borgo Pietro Wuhrer 119, 25123 Brescia (BS)
Operational headquarters
Via dell’Industria 9, 46043 Castiglione delle Stiviere (MN)
